Gilmore 2350mm (92.5″) Wingspan from Black Horse – Balsa Wood ARF – BHM1003-001
Roscoe Turner was the preeminent aerial showman of the 1930s, and perhaps of all time. From 1929 to 1930, Turner set numerous cross-country speed records and won many air races. To raise publicity while he was flying for the Gilmore Oil Company in the early 1930s, Turner adopted a lion cub and flew with him until he became too large. A lion’s head was the logo for the Gilmore Oil Company, and Turner named the cub Gilmore. Turner retired from air racing in 1939, but continued to be involved in aviation until his death, which, unlike for so many early aviators, was from natural causes.
The model is scaled to approximately 1:3 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 60cc displacement.
Visit the Official Black Horse Gilmore 2350mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Classic Racing Livery The racing scheme is a tip of the cap to the golden era when barnstorming was a house-hold term. |
Factory Weathered Printing The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal. |
Fiberglass Molded Cowl Exceptional quality fiberglass molded cowl really adds to the realism and scale appeal. |
Gas or Electric Power You can choose between gas or electric to power your model depending on your preference. |
Large Electronics Hatch Ample room for your various electronics, batteries, gyros or anything you desire to complete your electrical system. |
Scale Racing Canopy The canopy has the scale outline and look of the original from the 1930’s. |
Features:
- High level of prefabrication right out of the box
- Lightweight, strong, laser cut balsa and plywood construction
- Panel lines and details printed directly onto the pre-applied, high quality covering
- Aerofoiled tail surfaces
- Recessed hinges on all control surfaces
- Pre-drilled hinge mounting holes
- Heavy-duty pin hinges on all control surfaces
- Large easy access fuel tank/battery/servo access hatches with sprung loaded latches
- Painted and detailed cockpit, pilot and interior included
- Fiberglass control horns with ball link connector
- comprehensive control and fitting accessories included
- Two-piece, plug-in wings simplify transportation and assembly
- Fiberglass cowl and glass reinforced landing gear covers/pants
- Mounts for both electric and gas power options included
Includes:
- Black Horse Gilmore 2350mm (92.5″) Wingspan – ARF
Requires (Electric):
- 6 Channel radio – select a minimum 6 channel radio from our Radio Collection
- 6 Channel receiver – select a minimum 6 channel receiver from our Receiver Collection
- 180-185Kv Brushless Outrunner Motor – we recommend the Admiral GP60 8925-180Kv Brushless Motor
- 85-120 Amp Brushless ESC – we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
- 7x high torque servos – we recommend Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servo
- For 10S setup TWO 5 Cell 18.5V 5000 – 6000mAh LiPo Batteries with EC5 connector in series – we recommend Admiral Pro 4000mAh 5S 18.5V 60C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
- 2 to 1 EC5 series adapter – we recommend Admiral EC5 2 to 1 Series Adapter
- Electric propeller – we recommend the APC 22x12E propeller
- 6 Cell compatible battery charger – select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
- Engine: 60cc
- Gas Propeller: APC 22×8
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).