Yak 11 2350mm (92.5″) Wingspan from Black Horse – Balsa Wood ARF – BHM1016-001
The Yakovlev Yak-11 is a trainer aircraft used by the Soviet Air Force and other Soviet-influenced air forces from 1947 until 1962.
The Black Horse Yak 11 faithfully represents the classic Russian trainer as attention was paid to a true to original appearance and best possible flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 40-60cc displacement.
Visit the Official Black Horse Yak 11 2350mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
 |
Factory Weathered Printing The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal. |
 |
Naca Airfoil Design For Improved Airflow The Yak 11 utilizes a Naca airfoil design which maximizes airflow above and below each wing for increased lift and performance. |
 |
Electric Power The Yak 11 uses an electric power recommendation with ample room for your electronics but can accept a gas power setup as well. |
 |
Large Wingspan The impressive 92.5″ wingspan offers impressive presence both in the air and on the ground. |
Features:
- High level of prefabrication right out of the box
- Lightweight, strong, laser cut balsa and plywood construction
- Panel lines and details printed directly onto the pre-applied, high quality covering
- Electric retracts with oleo struts for quality and scale appeal
- Recessed hinges on all control surfaces
- Pre-drilled hinge mounting holes
- Heavy-duty pin hinges on all control surfaces
- Large easy access fuel tank/battery/servo access hatches with spring loaded latches
- Painted and detailed cockpit, pilot and interior included
- Fiberglass control horns with ball link connector
- Comprehensive control and fitting accessories included
- Four-piece, plug-in wings simplify transportation and assembly
- Fiberglass cowl
- Mounts for both electric and gas power options included
Includes:
- Black Horse Yak 11 2350mm (92.5″) Wingspan – ARF
- Electric retracts with oleo struts
- Instruction manual
Requires (Electric):
- 8 Channel radio – select a minimum 8 channel radio from our Radio Collection
- 8 Channel receiver – select a minimum 8 channel receiver from our Receiver Collection
- 180Kv Brushless outrunner motor – we recommend the Admiral GP60 8925-180Kv Brushless Motor
- 130 Amp brushless ESC – we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
- 2x 2S 2000-3000mAh LiPo or LiFe receiver packs – we recommend Admiral 2100mAh 2S 6.6V LiFe Battery with XT60/JR/Futaba Connectors
- 8x high torque servos – we recommend 8 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos
- For 10S setup TWO 5 Cell 18.5V 5000 – 6000mAh LiPo Batteries with EC5 connector in series – we recommend Admiral Pro 6000mAh 5S 18.5V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
- 2 to 1 EC5 series adapter – we recommend BenchCraft EC5 2 to 1 Series Adapter
- Electric propeller – we recommend between an APC 24x10E and 25×12 2-blade propeller
- 6 Cell compatible battery charger – select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
- Engine: 40-60cc gas
- Gas Propeller: N/A
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
